Object name: SERVICE
In order to list available service, use the SHOW action:
[root@centreon ~]# ./centreon -u admin -p centreon -o SERVICE -a show
host id;host name;id;description;check command;check command arg;normal check interval;retry check interval;max check attempts;active checks enabled;passive checks enabled
14;Centreon-Server;19;Disk-/;;;;;;2;2
14;Centreon-Server;20;Disk-/home;;;;;;2;2
14;Centreon-Server;21;Disk-/opt;;;;;;2;2
14;Centreon-Server;22;Disk-/usr;;;;;;2;2
14;Centreon-Server;23;Disk-/var;;;;;;2;2
14;Centreon-Server;151;Load;;;;;;2;2
14;Centreon-Server;25;Memory;;;;;;2;2
14;Centreon-Server;26;Ping;;;;;;2;2
14;Centreon-Server;40;dummy;check_centreon_dummy;!2!critical;;;;2;2
Columns are the following:
| Column | Description |
|---|---|
| Host ID | Host ID |
| Host name | Host name |
| Service ID | Service ID |
| Service description | Service description |
| Check Command | Check command |
| Command arguments | Check command arguments |
| Normal check interval | Normal check interval |
| Retry check interval | Retry check interval |
| Max check attempts | Maximum check attempts |
| Active check enable | 1 when active checks are enabled, 0 otherwise |
| Passive check enable | 1 when passive checks are enabled, 0 otherwise |
In order to add a service, use the ADD action:
[root@centreon ~]# ./centreon -u admin -p centreon -o SERVICE -a add -v "Host-Test;ping;Ping-LAN"
The required fields are:
| Order | Description |
|---|---|
| 1 | Host name |
| 2 | Service description |
| 3 | Service template - Only one service template can be defined |
Note
You need to generate your configuration file and restart monitoring engine in order to apply changes.
In order to remove a service, use the DEL action:
[root@centreon ~]# ./centreon -u admin -p centreon -o SERVICE -a del -v "test;ping"
The required fields are:
| Order | Description |
|---|---|
| 1 | Host name |
| 2 | Service description |
Note
You need to generate your configuration file and restart monitoring engine in order to apply changes.
In order to set a specific paremeter for a particular service, use the SETPARAM action:
[root@centreon ~]# ./centreon -u admin -p centreon -o SERVICE -a setparam -v "test;ping;max_check_attempts;10"
[root@centreon ~]# ./centreon -u admin -p centreon -o SERVICE -a setparam -v "test;ping;normal_check_interval;2"
[root@centreon ~]# ./centreon -u admin -p centreon -o SERVICE -a setparam -v "test;ping;normal_check_interval;http://192.168.1.2/admincp"
The required fields are:
| Order | Description |
|---|---|
| 1 | Host name |
| 2 | Service description |
| 3 | Paramater that you want to update |
| 4 | New parameter value |
Parameters that may be modified:
| Parameter | Description |
|---|---|
| description | Description |
| comment | Comment |
| is_volatile | 1 when service is volatile, 0 otherwise |
| active_checks_enabled | 1 when active checks are enabled, 0 otherwise |
| passive_checks_enabled | 1 when passive checks are enabled, 0 otherwise |
| parallelize_checks | 1 when parallelize checks are enabled, 0 otherwise |
| obsess_over_service | 1 when obsess over service is enabled, 0 otherwise |
| check_freshness | 1 when check freshness is enabled, 0 otherwise |
| freshness_threshold | Value in seconds |
| event_handler_enabled | 1 when event handler is enabled, 0 otherwise |
| flap_detection_enabled | 1 when flap detection is enabled, 0 otherwise |
| process_perf_data | 1 when process performance data is enabled, 0 otherwise |
| retain_status_information | 1 when status information is retained, 0 otherwise |
| retain_nonstatus_information | 1 when non status information is retained, 0 otherwise |
| notifications_enabled | 1 when notification is enabled, 0 otherwise |
| check_command | Name of the check command |
| check_command_arguments | Arguments that go along with the check command, prepend each argument with the ”!” character |
| event_handler | Name of the event handler command |
| event_handler_arguments | Arguments that go along with the event handler, prepend each argument with the ”!” character |
| check_period | Name of the check period |
| notification_period | Name of the notification period |
| flap_detection_options | Flap detection options |
| template | Name of the service template |
| notes | Notes |
| notes_url | Notes URL |
| action_url | Action URL |
| icon_image | Icon image |
| icon_image_alt | Icon image alt text |
Note
You need to generate your configuration file and restart monitoring engine in order to apply changes.
You may want to tie a service to an extra host. In order to do so, use the ADDHOST or SETHOST actions where add will append and set will overwrite previous definitions:
[root@centreon ~]# ./centreon -u admin -p centreon -o SERVICE -a sethost -v "host1;ping;host2"
[root@centreon ~]# ./centreon -u admin -p centreon -o SERVICE -a addhost -v "host1;ping;host2"
Note
You need to generate your configuration file and restart monitoring engine in order to apply changes.
In order to remove the relation between a host and a service, use the DELHOST action:
[root@centreon ~]# ./centreon -u admin -p centreon -o SERVICE -a delhost -v "host1;ping;host2"
The service ping which was originally linked to host1 and host2 is now only linked to host1.
Note
You need to generate your configuration file and restart monitoring engine in order to apply changes.
In order to view the custom macro list of a service, use the GETMACRO action:
[root@centreon ~]# ./centreon -u admin -p centreon -o SERVICE -a getmacro -v "host1;ping"
macro name;macro value
$_SERVICETIME$;80
$_SERVICEPL$;400
In order to set a macro for a specific service use the SETMACRO action:
[root@centreon ~]# ./centreon -u admin -p centreon -o SERVICE -a setmacro -v "test;ping;time;80"
[root@centreon ~]# ./centreon -u admin -p centreon -o SERVICE -a setmacro -v "test;ping;pl;400"
Note
You need to generate your configuration file and restart monitoring engine in order to apply changes.
In order to remove a macro from a specific service use the DELMACRO action:
[root@centreon ~]# ./centreon -u admin -p centreon -o SERVICE -a delmacro -v "test;ping;time"
[root@centreon ~]# ./centreon -u admin -p centreon -o SERVICE -a delmacro -v "test;ping;pl"
Note
You need to generate your configuration file and restart monitoring engine in order to apply changes.
In order to view the contact list of a service, use the GETCONTACT action:
[root@localhost core]# ./centreon -u admin -p centreon -o "SERVICE" -a getcontact -v "Centreon-Server;Ping"
id;name
28;Contact_1
29;Contact_2
In order to add a new contact to notification contact list, use the ADDCONTACT or SETCONTACT actions where add will append and set will overwrite previous definitions:
[root@centreon ~]# ./centreon -u admin -p centreon -o SERVICE -a addcontact -v "test;ping;User1"
[root@centreon ~]# ./centreon -u admin -p centreon -o SERVICE -a setcontact -v "test;ping;User1|User2"
Note
You need to generate your configuration file and restart monitoring engine in order to apply changes.
In order to remove a contact from the notification contact list, use the DELCONTACT action:
[root@centreon ~]# ./centreon -u admin -p centreon -o SERVICE -a delcontact -v "test;ping;User1"
[root@centreon ~]# ./centreon -u admin -p centreon -o SERVICE -a delcontact -v "test;ping;User2"
Note
You need to generate your configuration file and restart monitoring engine in order to apply changes.
In order to view the contact group list of a service, use the GETCONTACTGROUP action:
[root@localhost core]# ./centreon -u admin -p centreon -o "SERVICE" -a getcontactgroup -v "Centreon-Server;Ping"
id;name
28;ContactGroup_1
29;ContactGroup_2
In order to add a new contactgroup to notification contactgroup list, use the ADDCONTACTGROUP or SETCONTACTGROUP actions where add will append and set will overwrite previous definitions:
[root@centreon ~]# ./centreon -u admin -p centreon -o SERVICE -a addcontactgroup -v "test;ping;Group1"
[root@centreon ~]# ./centreon -u admin -p centreon -o SERVICE -a setcontactgroup -v "test;ping;Group1|Group2"
Note
You need to generate your configuration file and restart monitoring engine in order to apply changes.
In order to remove a contactgroup from the notification contactgroup list, use DELCONTACTGROUP action:
[root@centreon ~]# ./centreon -u admin -p centreon -o SERVICE -a delcontactgroup -v "test;ping;Group1"
[root@centreon ~]# ./centreon -u admin -p centreon -o SERVICE -a delcontactgroup -v "test;ping;Group2"
Note
You need to generate your configuration file and restart monitoring engine in order to apply changes.
In order to view the trap list of a service, use the GETTRAP action:
[root@localhost core]# ./centreon -u admin -p centreon -o "SERVICE" -a gettrap -v "Centreon-Server;Ping"
id;name
48;ciscoConfigManEvent
39;ospfVirtIfTxRetransmit
In order to add a new trap, use the ADDTRAP or SETTRAP actions where add will append and set will overwrite previous definitions:
[root@centreon ~]# ./centreon -u admin -p centreon -o SERVICE -a addtrap -v "test;ping;snOspfVirtIfConfigError"
[root@centreon ~]# ./centreon -u admin -p centreon -o SERVICE -a settrap -v "test;ping;snOspfVirtNbrStateChange|snTrapAccessListDeny"
Note
You need to generate your configuration file and restart monitoring engine in order to apply changes.
In order to remove a trap from a service, use the DELTRAP command:
[root@centreon ~]# ./centreon -u admin -p centreon -o SERVICE -a deltrap -v "test;ping;snOspfVirtIfConfigError"